-7%
HBTZ 136224 BS, 13.6t total weight, tandem flatbed trailer with twin tires, planks upright, loading platform sloping, grating ramps Humbaur heavy load trailer•
HBTZ 136224 BS, 13,6t Gesamtgewicht, Tandem-Hochlader mit Zwillingsbereifung, Bohlen stehend, Ladefläche abgeschrägt, Gitterrost-Rampen Humbaur Schwerlastanhänger• - Image 2
HBTZ 136224 BS, 13,6t Gesamtgewicht, Tandem-Hochlader mit Zwillingsbereifung, Bohlen stehend, Ladefläche abgeschrägt, Gitterrost-Rampen Humbaur Schwerlastanhänger• - Image 3
HBTZ 136224 BS, 13,6t Gesamtgewicht, Tandem-Hochlader mit Zwillingsbereifung, Bohlen stehend, Ladefläche abgeschrägt, Gitterrost-Rampen Humbaur Schwerlastanhänger• - Image 4
HBTZ 136224 BS, 13,6t Gesamtgewicht, Tandem-Hochlader mit Zwillingsbereifung, Bohlen stehend, Ladefläche abgeschrägt, Gitterrost-Rampen Humbaur Schwerlastanhänger• - Image 5

HBTZ 136224 BS, 13.6t total weight, tandem flatbed trailer with twin tires, planks upright, loading platform sloping, grating ramps Humbaur heavy load trailer•

€ 32.490,00 € 35.054,00 VAT included.

Print Friendly, PDF & Email
  • BWP axes
  • Maintenance-free parabolic suspension with load compensation;
  • Tires
  • Twin tires,
  • Tires of the manufacturer's choice on steel rims;
  • ABS braking system according to ECE directive, with ALB function;
  • Spindle locking brake;
  • 2 interchangeable coupling heads red/yellow ISO 1728;
  • Galvanized drawbar with DIN screw drawbar eye Ø 40mm
  • Coupling height infinitely adjustable via crank;
  • Drawbar extension to approx. 2100 mm
  • 24-volt lighting system with multi-chamber taillights and LED side marker lights;
  • 15-pin connector for lighting;
  • Solid, welded and hot-dip galvanized frame;
  • Rear area beveled, slope 12°;
  • Flooring made of 40mm softwood planks;
  • Side walls made of anodized aluminum, foldable to the side and removable;
  • Corner posts galvanized, pluggable at the front and rear;
  • 2 folding steel ramps, galvanized, laterally adjustable;
  • Ramp surface: galvanized grating;
  • Ramp lifter: 1 gas spring per ramp;
  • Ramp securing at rear stake;
  • Reinforced 12 t gearbox support winch with load and high-speed gears;
  • 2 telescopic folding supports on the left and right at the rear of the vehicle;
  • Steel fenders (8-fold) with anti-spray mats;
  • Side underrun protection up to the 1st axle, foldable;
  • 2 wheel chocks with holder;
  • Contour marking on the sides and back;
  • Space for a two-line license plate on the left ramp;
chassis Axles from renowned manufacturers; Maintenance-free parabolic suspension with load equalization; Twin tires, tires of the manufacturer's choice on steel rims;
Brake system ABS brake system according to ECE directive, with ALB function; ABS connector ISO 7638; spindle parking brake; 2 non-interchangeable coupling heads red/yellow ISO 1728;
Note: Towing vehicle must have ABS/EBS connection
Traction device Galvanized drawbar with screw tow eye Ø40mm and V-value 40KN, infinitely adjustable via crank.
electrical system V-value for a towing vehicle with mechanical rear axle suspension approx. 40.3 kN; V-value for a towing vehicle with air-sprung rear axle approx. 30.2 kN
Bridge 24V lighting system with multi-chamber taillights and LED side marker lights, 15-pin connector for lighting; Solid, welded and hot-dip galvanized frame;
Flooring made of 40 mm softwood planks; loading platform angled at the rear; side walls made of anodized aluminum, foldable and removable; corner posts galvanized, pluggable at the front and rear;
Charging safety 3 pairs of lashing rings recessed in the bridge floor, 7 pairs of lashing brackets in the outer frame
support Reinforced 12 t gearbox support winch with load and high-speed gears; 2 telescopic folding supports on the left and right at the rear of the vehicle;
Ramps 2 folding, galvanized steel ramps, laterally adjustable; ramp lifter with 1 gas spring per ramp; ramp securing device on rear stake; ramp surface made of softwood planks,
equipment Steel mudguards with anti-spray mats; foldable side underrun protection up to the first axle; contour markings on the sides and rear; 2 wheel chocks with holders, space for a two-line license plate;

With these dimensions and standard equipment, the vehicle can only be attached to towing vehicles with
to be attached to the air-sprung rear axle.

Technical data

Internal dimensions: approx. 6,280 mm x 2,470 mm x 400 mm

Overall dimensions: approx. 8,350 mm x 2,550 mm x 3,000 mm

Permissible total weight: 13,600 kg

Payload: approx. 10,250 kg

Tires: 205/65 R17.5 inch

Loading height: approx. 850 mm

Coupling height: approx. 600-900 mm

Approach angle: approx. 15°

Plank length: approx. 2400 mm

Plank width: approx. 520 mm

3 pairs of lashing rings, 6t, recessed in the bridge floor

7 pairs of lashing rings, 2t in the outer frame

Other versions and models available!

All information is provided without guarantee, subject to errors, misprints and typos.
Prices shown are for items in stock; new orders are subject to price changes.
Prices are valid for Austria (incl. 20 % VAT) and may differ in other countries.
Stock photos; the actual product may differ from the image.
Attention: Subject to prior sale and changes! / Images may include/show accessories/options available at an additional cost!
All prices exclude accessories!

 

WE DELIVER THROUGHOUT AUSTRIA!

Collection at the factory D-86368 – Gersthofen
Surcharge for collection in Poggersdorf €1559,- incl. VAT.
COC documents €300,- incl. VAT.

 

 

Category:

Related products